The Blog

configuring EHWIC-1GE-SFP-CU

EHWIC 1 GE-SFP-CU: Key Features and Configuration

Key Features/Characteristics: The Cisco interface card – Gigabit Ethernet WAN EHWIC (EHWIC 1 GE-SFP-CU) is an enhanced high-speed interface card providing copper and optical Gigabit Ethernet ports and connectivity of T1/E1 and T3/E3 over optical for Cisco ISRs. The EHWIC 1 GE-SFP-CU provides copper and optical Gigabit Ethernet connectivity through a dual-purpose uplink. Note The

Continue Reading →
Cisco Multiflex Voice/WAN Interface Card---EHWIC - 2 ports - T1/ E1

Specs and Troubleshooting for Cisco Multiflex Voice/WAN Interface Card

Cisco 1 and 2 Port T1/E1 Multiflex Voice/WAN Interface Card includes the most popular VWIC-1MFT-T1, VWIC-1MFT-E1, and VWIC-2MFT-E1 support multiple voice, data and integrated voice/data applications in Cisco 2600, 2800, 3600, 3700, and 3800 multiservice routers. Generally speaking, Cisco Multiflex Voice/WAN Interface Card has key features of reducing networking lifecycle costs and maximizing investment protection. In

Continue Reading →
C3KX-SM-10G features and benefits

FAQ for NetFlow and Cisco Module C3KX-SM

What is Netflow? Netflow is a feature that was introduced on Cisco routers that give the ability to collect IP network traffic as it enters an interface. Routers and switches that support NetFlow can collect IP traffic statistics on all interfaces where NetFlow is enabled, and later export those statistics as NetFlow records, toward at

Continue Reading →
add the HWIC module into the Cisco 2901 router

Features of HWIC-4ESW Module & Steps of Adding a HWIC to Cisco 2901 Router

Overview of Cisco HWIC-4ESW Module Offering ease of configuration, deployment, and management while using the powerful characteristics of Cisco routing and Cisco Catalyst switching features, the 4-port Cisco EtherSwitch 10/100 high-speed WAN interface cards (HWICs) supported on the Cisco 1800 (modular), Cisco 1941, Cisco 2800/2900, and Cisco 3800/3900 series integrated services routers. Providing line-rate Layer

Continue Reading →
C3KX-NM-10G overview

Tutorial of SFP vs. SFP+ and Cisco modules C3KX-NM-1G & Cisco C3KX-NM-10G

The difference between  SFP and SFP+ What is the difference of SFP+, SFP and XFP? The 10G module has been developed from 300Pin. XENPAK, X2, XFP and finally achieve with the same size as SFP which can transmit 10G signals called SFP+. SFP by virtue of its small cost and other advantages to meet the

Continue Reading →
Cisco-Modules-GLC-LH-SM

Tutorial of Cisco Module GLC-LH-SM Optics Features and Advantages

Features of Cisco GLC-LH-SM Optics . The GLC-LH-SM, can be used and interchanged on a wide variety of Cisco products and can be mixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, or 1000BASE-ZX on a port-to-port basis Cisco Catalyst 6500 or 7600 Series Supervisor Engine 720. . The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter

Continue Reading →
Cisco HWIC 1T card

Specs & Features of 1-Port and 2-Port Fast Ethernet High-Speed WIC

The Layer 3 Cisco 1- and 2-Port Fast Ethernet HWICs supported on Cisco ISRs offer small-to-large-sized businesses and enterprise the option to add Layer 3 routed ports with many advanced features, including quality-of-service (QoS) and rate-limiting capabilities. The following list will share the maximum number of 1 Port & 2 port HWICs and relevant software

Continue Reading →
1921-k9 back overview and explanation

Full Diagram Overview and Specs for Cisco 1921/K9 & Cisco1921-SEC/K9

Cisco 1921/K9 overview:  The Cisco 1921 Integrated Services Router (ISR) delivers highly secure data, mobility, and application services. Now, let’s share Cisco 1921-K9 router full and simple tutorial in diagram form. LED area description · SYS: Solid green —normal operation. Blinking green —System is booting or is in ROM monitor mode. Amber —System error. Off —Power is off or system board is faulty. · ACT: Solid or blinking —any packets are transmitted/received on any WAN/LAN, or when monitoring system activity. · PoE: Green —PoE is available. Amber —Power supply is not supplying PoE power.S (Speed): 1 blink + pause —GE port operating at 10 Mb/s. 2 blink + pause —GE port operating at 100 Mb/s. 3 blink + pause —GE port operating at 1000 Mb/s. · L (Link): Green —GE link is established. Off —No GE link is established.  Note: · 1 integrated EHWIC slots for flexible configurations & support of two modules:  1 double wide HWIC-D or single wide EHWIC/HWIC module; or 2 single wide EHWIC/HWIC module . (Each HWIC Slot offers high data throughput capability with up to 1.6 Gbps aggregate towards the router processor and up to 2       Gbps aggregate to other module slots over MultiGigabit Fabric (MGF)). · 1 AUX port (auxiliary port) —RJ-45 connectors for Remote configuration.

Continue Reading →
Popular Cisco HWIC-2 SHDSL

Full Tutorial of Cisco 1921 Router Supported Interface Card and Modules

The following are details of almost all the Cisco 1921 supported interface card: Note: all Cisco 1900 series router not support Voice Modules New Modules EHWIC-4G-LTE-A:  4G LTE EHWIC for AT&T, 700 MHz Band 17, 850/1900/2100 MHz UMTS/HSPA bands EHWIC-4G-LTE-G:  4G LTE EHWIC for Europe, LTE 800/900/1800/ 2100/2600 MHz, 900/1900/2100 MHz UMTS/HSPA bands EHWIC-4G-LTE-V:  Dedicated

Continue Reading →
Cheapest and Best Cisco 871 router

Overview and Configuration of Cisco 871 Router

It is obvious that Cisco is a computer networking giant around the world with designing and manufacturing routers, switches and other networking hardware and software for both consumer and enterprise market. The Cisco Router 800 series belongs to the lowest SOHO end. The most popular models in the 800 series are the 880 and 870

Continue Reading →
Categories
Click to Chat